Progress PHN3325X User Manual download pdf (Page 10)

CLOCK FUNCTIONS

SYMBOL FUNCTION DESCRIPTION

COUNT UP TIMER To set count up. It shows how long the appliance operates.

This function has no effect on the operation of the appliance.

TIME OF DAY To examine the time of day. For changing the time of day refer

to 'Setting the time of day'.

DURATION To set how long the appliance operates.

END To set when the appliance deactivates. You can use Duration

and End at the same time (Time delay), if the appliance is to

be activate and deactivate automatically later.

SET+GO To start the appliance with necessary settings with only one

touch of the sensor field, any time later.

Count Up Timer

Use the Count Up Timer to monitor how

long the appliance operates. It is on imme-

diately when the appliance starts to heat.

Reset the Count Up Timer: touch

Touch

until the display shows "00:00"

and the Count Up Timer starts to count up

again.

You cannot use the Count Up Timer

when Duration or End is set.

Setting the DURATION

Activate the appliance and set an oven

function and temperature.

Touch

again and again until the dis-

play shows

. flashes in the dis-

play.

Use

or to set the minutes for

DURATION.

Touch

to confirm.

Use

or to set the hours for DU-

RATION.

If you touch or while you set the

DURATION, the appliance switches to

the setting of the END function.

When the set time ends, an acoustic

signal sounds for two minutes.

and time setting flash in the display.

The appliance deactivates.

Touch a sensor field or open the oven

door to stop the acoustic signal.

7. Deactivate the appliance.

Setting the END

Activate the appliance and set an oven

function and temperature.

Touch

again and again until the dis-

play shows

. flashes in the dis-

play.

Use

or to set the END (first you

set the minutes and then the hours)

and

or to confirm.

When the set time ends, an acoustic

signal sounds for two minutes.

symbol and the time setting flash in

the display. The appliance deactivates.

5. Touch a sensor field or open the oven

door to stop the acoustic signal.

Deactivate the appliance.

Setting the SET+GO

Set an oven function (or programme)

and temperature (refer to "Setting the

oven function" and "Changing the tem-

perature").

Set the DURATION (refer to "Setting

the DURATION").

Touch

again and again until

flashes in the display.

Touch

to set the SET+GO function.

The display shows

and with an

indicator. This indicator shows which

clock function is activated.

Touch a sensor field (apart from ON /

OFF) to start the SET+GO function.

You can use the SET+GO function only

when the DURATION is set.

Check result (selected models only)

If you set the END or DURATION function,

two minutes before the end of cooking an

acoustic signal sounds and the lamp acti-

vates. The appliance goes to the setting of

10 progress

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments

Progress PHN3325X User Manual Page 10

Comments to this Manuals

Related products and manuals for Hobs Progress PHN3325X