Progress ZEL640W User Manual download pdf (Page 14)

Scratches or dark stains on the surface

cause no effect on how the appliance

operates.

To remove the dirt:

1. Use the cleaning powder or the clean-

ing pad.

2. Clean the appliance with a moist cloth

and some detergent.

3. Heat the hotplate to a low temperature

and let it to dry.

4. To keep the hotplates in good shape,

regularly rub in a sewing machine oil.

Polish off the oil with absorbent paper.

Important! For stainless steel edges of the

hob use the cleaning agent for stainless

steel.

The stainless steel edge of the plate

can change the colour as a result of

the high temperature.

TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate the appli-

ance or operate it.

The appliance is not connected

to an electrical supply or it is

connected incorrectly.

Check if the appliance is cor-

rectly connected to the electri-

cal supply.

Problem with the house electri-

cal system.

Examine the fuse in the electri-

cal system of the house in the

fuse box. If the fuses blow

again and again, speak to

qualified electrician.

If you tried the above solutions and cannot

repair the problem, speak to your dealer or

the customer service. Give the data from

the rating plate, three digit letter code for

the glass ceramic (it is in the corner of the

glass surface) and an error message that

comes on.

Make sure, you operated the appliance cor-

rectly. If not the servicing by a customer

service technician or dealer will not be free

of charge, also during the warranty period.

The instructions about the customer service

and conditions of guarantee are in the guar-

antee booklet.

Labels supplied with the accessories

bag

Stick the adhesive labels as indicated be-

low:

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO

DATA

MODELMODEL

MOD.

PROD.NO.

SER.NO.

03 IT

MADE IN ITALY

TYPE

230V-50Hz

IP20

0049

1 2 3

1

Stick it on Guarantee Card and send

this part

14 progress

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments