Progress PHN3325X User Manual download pdf (Page 12)

flashes in the display.

3. Use or to set the END and

or to confirm. First you set the

minutes and then the hours.

When the set time ends, an acoustic signal

sounds for two minutes. symbol and the

time setting flash in the display. The

appliance deactivates.

4. Touch a sensor field or open the oven

door to stop the acoustic signal.

5. Deactivate the appliance.

Setting the SET+GO

You can use the SET+GO function only

when the DURATION is set.

1.

Set an oven function (or a programme)

and temperature (refer to "Setting the

oven function" and "Changing the

temperature").

2.

Set the DURATION (refer to "Setting the

DURATION").

3.

Touch

again and again until

flashes in the display.

4. Touch to set the SET+GO function.

The display shows

and with an

indicator. This indicator shows which clock

function is activated.

5. Touch a sensor field (apart from ON /

OFF) to start the SET+GO function.

Setting the MINUTE MINDER

Use the MINUTE MINDER to set a

countdown (maximum 2 h 30 min). This

function has no effect on the operation of

the oven. You can set the MINUTE MINDER

at any time and also when the appliance is

off.

1. Touch

.

and "00" flash in the display.

2. Use or to set the MINUTE

MINDER. First you set the seconds,

then the minutes and the hours.

3. Touch or the MINUTE MINDER

starts automatically after five seconds.

When the set time ends, an acoustic signal

sounds for two minutes and 00:00 and

flash in the display.

4.

Touch a sensor field or open the oven

door to stop the acoustic signal.

Setting the Time delay function

The DURATION and END can be

used at the same time, if the appliance is to

be switched on and off automatically later.

In this case, first set the DURATION

and

then the END function (refer to "Setting

the DURATION" and "Setting the END" ).

When the Time delay function is

activated, the display shows a

static symbol of the oven

function,

with a dot and .

The dot shows which clock

function is on in the Clock /

residual heat display.

AUTOMATIC PROGRAMMES

WARNING! Refer to Safety

chapters.

There are 20 automatic programmes. Use

an automatic programme or recipe when

you do not have the knowledge or

experience on how to prepare a dish. The

display shows the shelf position and the

default cooking times for all automatic

programmes.

12 Progress

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments