Progress PAI6000E User Manual download pdf (Page 29)

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar. If

not, the dirt can cause damage to the

hob. Take care to avoid burns. Put the

special scraper on the glass surface at

an acute angle and move the blade on

the surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration. Clean

the hob with a moist cloth and non-

abrasive detergent. After cleaning, wipe

the hob dry with a soft cloth.

• Remove shiny metallic discoloration:

use a solution of water with vinegar and

clean the glass surface with a moist

cloth.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

You cannot activate or oper-

ate the hob.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec-

tion diagram.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If

the fuse is blown again and

again, contact a qualified

electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

You touched 2 or more sen-

sor fields at the same time.

Touch only one sensor field.

There is water or fat stains on

the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Progress 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Comments to this Manuals

No comments