Progress PAS8060E User Manual download pdf (Page 20)

To remove the dirt:

1. – Remove immediately: melted plas-

tic, plastic foil, and food with sugar. If

not, the dirt can cause damage to

the appliance. Use a special scraper

for the glass . Put the scraper on the

glass surface at an acute angle and

move the blade on the surface .

–

Remove after the appliance is

sufficiently cool: limescale rings ,

water rings, fat stains, shiny metallic

discolorations. Use a special cleaning

agent for glass ceramic or stainless

steel.

2. Clean the appliance with a moist cloth

and some detergent.

3. At the end rub the appliance dry

with a clean cloth.

TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate the appli-

ance or operate it.

The appliance is not connec-

ted to an electrical supply or it

is connected incorrectly.

Check if the appliance is cor-

rectly connected to the electrical

supply (refer to connection dia-

gram).

Activate the appliance again and

set the heat setting in less than

10 seconds.

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

There is water or fat stains on

the control panel.

Clean the control panel.

An acoustic signal sounds and

the appliance deactivates.

An acoustic signal sounds

when the appliance is deacti-

vated.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The appliance deactivates. You put something on the sen-

sor field

Remove the object from the

sensor field.

The residual heat indicator

does not come on.

The cooking zone is not hot

because it operated only for a

short time.

If the cooking zone operated

sufficiently long to be hot, speak

to the service centre.

The Automatic Heat Up func-

tion does not operate.

The cooking zone is hot. Let the cooking zone become

sufficiently cool.

The highest heat setting is set. The highest heat setting has the

same power as the Automatic

Heat Up function.

You decreased the heat setting

from

Start from and only increase

the heat setting.

You cannot activate the outer

ring.

Activate the inner ring first.

The sensor fields become hot. The cookware is too large or

you put it too near to the con-

trols.

Put large cookware on the rear

cooking zones if necessary.

comes on.

The Automatic Switch Off op-

erates.

Deactivate the appliance and

activate it again.

comes on.

The Child Safety Device or the

Lock function operates.

Refer to the chapter “Daily use”.

20 progress

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comments to this Manuals

No comments

Progress PAS8060E User Manual Page 20

Comments to this Manuals

Related products and manuals for Hobs Progress PAS8060E