Progress PKT1241 User Manual download pdf (Page 24)

Defrosting the freezer

A certain amount of frost will always

form on the freezer shelves and around

the top compartment.

Important! Defrost the freezer when the

frost layer reaches a thickness of about 3-5

mm.

To remove the frost, do these steps:

1. Switch off the appliance.

2. Remove any stored food, wrap it in

several layers of newspaper and put it

in a cool place.

3. Leave the door open.

4. When defrosting is completed, dry the

interior thoroughly and refit the plug.

5. Switch on the appliance.

6. Set the temperature regulator to obtain

the maximum coldness and run the ap-

pliance for two or three hours using this

setting.

7. Reload the previously removed food in-

to the compartment.

Important! Never use sharp metal tools to

scrape off frost from the evaporator as you

could damage it. Do not use a mechanical

device or any artificial means to speed up

the thawing process other than those

recommended by the manufacturer. A

temperature rise of the frozen food packs,

during defrosting, may shorten their safe

storage life.

Periods of non-operation

When the appliance is not in use for long

periods, take the following precautions:

•

disconnect the appliance from elec-

tricity supply

• remove all food

•

defrost

10)

and clean the appliance and all

accessories

• leave the door/doors ajar to prevent un-

pleasant smells.

If the cabinet will be kept on, ask some-

body to check it once in a while to prevent

the food inside from spoiling in case of a

power failure.

WHAT TO DO IF…

Warning! Before troubleshooting,

disconnect the mains plug from the

mains socket.

Only a qualified electrician or compe-

tent person must do the troubleshoot-

ing that is not in this manual.

Important! There are some sounds during

normal use (compressor, refrigerant

circulation).

Problem Possible cause Solution

The appliance does not

operate. The lamp does

not operate.

The appliance is switched off. Switch on the appliance.

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

10) If foreseen.

24 progress

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

Comments to this Manuals

No comments